| Customization: | Available |
|---|---|
| After-sales Service: | Online Technical Support |
| Warranty: | 12 Months |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Structure:
It is composed of the front support, feed hopper, screw, filter, juice holder, rear support, slag groove and other parts. The spiral spindle is supported in the rolling bearing, and the right end is supported in the hand wheel bearing. The motor is driven by a pair of triangular belt wheels.
| Model | Capacity | Power | Dimension |
| LZ-0.5 | 0.01-0.5T/h | 0.92kw | 1000×320×1280mm |
| LZ-1.5 | 0.3-1.5T/h | 3.5kw | 1560×450×1640mm |
| LZ-2.5 | 0.6-2.5T/h | 7.5kw | 2200×600×1960mm |
| LZ-5 | 1-5T/h | 10kw | 3000×1000×2600mm |
How it works:
The main component of the equipment is that the bottom diameter of the screw gradually increases along the direction of the slag outlet and the pitch gradually decreases. When the material is pushed by the screw, the press of the material is formed due to the reduction of the volume of the spiral cavity.
The direction of rotation of the spiral main shaft is clockwise from the direction of the hopper to the slag groove.
Raw material add to the feed hopper, under the propulsion of spiral compression, the squeezing the juice through a filter at the bottom of the gravy, while the waste and the conical part of the surge tank by screw formed between the annular gap discharge, pressure regulating head along the axial movement of adjustable gap size. It is used clockwise (when turning the handwheel bearing seat from the slag discharge groove of the equipment to the hopper end, the pressure regulator head is to the right, and the gap is reduced, and the gap is larger.) Change the size of the void, that is, adjust the resistance of slag discharge. Can change the slag rate, but if the gap is too small, under extrusion, part of the slag particles will be squeezed out with the juice through the filter, although the juice increases, but the quality of the juice is relatively decreased, the size of the gap should be based on the user's specific process requirements.
1. Are you a manufacturer or a trading company?
We are a professional manufacturer of food & beverages processing machine.
){kind=link}